Tiffin Allegro: Center of Gravity & Leveling Safety

Definition

Critical safety specs and COG considerations when leveling large Tiffin Allegro Class A motorhomes.

How It Works

Scope: This guide covers tiffin allegro: center of gravity & leveling safety for US users.
Rule: Use vehicleSpecs["Tiffin Allegro"]["wheelbase_in"]["wheelbase_in"] as the canonical wheelbase in for leveling calculations.

Specification	Value	Notes
Wheelbase	242	Wheelbase for Tiffin Allegro Class A

Examples

Scenario	Angle Measured	Block Height Required
Front-to-back slope: 2° pitch	2.0°	Front: 0.5", Rear: 1.5"
Side-to-side slope: 1.5° roll	1.5°	Left: 0.75", Right: 1.25"
Combined slope: 1° pitch + 1° roll	1.0° / 1.0°	Varies by wheel position

FAQ

How accurate is the iPhone sensor for RV leveling?

The iPhone's built-in gyroscope and accelerometer provide accuracy within 0.1° when properly calibrated. This is sufficient for RV leveling, as most RVs are considered level within 1-2° of horizontal.

Do I need to calibrate my iPhone before each use?

Yes, calibration is recommended, especially if you're using a phone case or if the camera bump affects the sensor reading. The app's zero-point calibration feature accounts for these offsets.

Can I use this app for any RV type?

Yes, RV Leveler supports both motorhomes (4-point leveling model) and trailers (3-point leveling model). The app adapts its calculations based on your vehicle type selection.

Download

Get precise leveling calculations with RV Leveler. The app uses your iPhone's sensors to measure angles and calculate exact block heights for each wheel position.

Learn more about RV leveling techniques. See also: Motorhome 4 Wheel Block Calculation.